Advanced Engineer

Advanced or Senior Engineers apply a broad knowledge of principals, practices and procedures to projects, gained from years of learning and experience. They typically work without supervision and are often the ones supervising entry- and mid-level engineers. Projects are more difficult in nature.

Wind Energy Engineer

Design underground or overhead wind farm collector systems and prepare and develop site specifications.

EXAMPLE SCENARIO

Engineers who work on offshore wind farm installations design farm layouts and create schematics. They also do analyses to optimize the designs and layouts of supportive infrastructure, such as underground cables, transmission lines and substation locations. These engineers also make recommendations to upgrade and streamline operations.

TYPICAL TASKS SRC

  • Troubleshoot new or existing product problems involving designs, materials, or processes.
  • Investigate or resolve operational problems, such as material use variances or bottlenecks.
  • Identify opportunities or implement changes to improve manufacturing processes or products or to reduce costs, using knowledge of fabrication processes, tooling and production equipment, assembly methods, quality control standards, or product design, materials and parts.
  • Apply continuous improvement methods such as lean manufacturing to enhance manufacturing quality, reliability, or cost-effectiveness.
  • Provide technical expertise or support related to manufacturing.

EXAMPLE JOB TITLES

Advanced Manufacturing Engineer, Facility Engineer

MEDIAN PAY SRC

$170,560

EDUCATION & TRAINING LEVEL

Bachelor's Degree

WORK EXPERIENCE REQUIRED

5+ years

SKILLS & REQUIREMENTS

Complex Problem Solving, Mathematics, Reading Comprehension, Active Listening, Judgment and Decision Making, Monitoring, Operation Monitoring, Speaking, Critical Thinking, Systems Analysis

Industrial Health & Safety Engineer

Plan, implement, and coordinate safety programs, requiring application of engineering principles and technology, to prevent or correct unsafe environmental working conditions.

EXAMPLE SCENARIO

An Industrial Health & Safety Engineer inspects an offshore wind farm or a construction site to determine if they meet specifications or standards.

TYPICAL TASKS SRC

  • Investigate industrial accidents, injuries, or occupational diseases to determine causes and preventive measures.
  • Inspect facilities, machinery, and safety equipment to identify and correct potential hazards, and to ensure safety regulation compliance.
  • Conduct or coordinate worker training in areas such as safety laws and regulations, hazardous condition monitoring, and use of safety equipment.
  • Maintain and apply knowledge of current policies, regulations, and industrial processes.
  • Report or review findings from accident investigations, facilities inspections, or environmental testing.

EXAMPLE JOB TITLES SRC

Environmental Health and Safety Director (EHS Director), Industrial Safety Engineer

MEDIAN PAY SRC

$145,080

EDUCATION & TRAINING LEVEL

Bachelor's Degree

WORK EXPERIENCE REQUIRED

5+ years

SKILLS & REQUIREMENTS

Critical Thinking, Reading Comprehension, Speaking, Writing, Active Listening, Judgment and Decision Making, Systems Analysis, Systems Evaluation, Active Learning, Complex Problem Solving

SIMILAR OCCUPATIONS

Agricultural Engineers, Chemical Engineers, Energy Engineers

Electrical and Electronics Engineer

Apply electrical and electronic theory and related knowledge, usually under the direction of engineering staff, to design, build, repair, calibrate, and modify electrical components, circuitry, controls, and machinery for subsequent evaluation and use by engineering staff in making engineering design decisions.

EXAMPLE SCENARIO

An Electrical Engineer is designing a turbine so installers know where to mount or connect underwater cable lines.

TYPICAL TASKS SRC

  • Modify, maintain, or repair electronics equipment or systems to ensure proper functioning.
  • Replace defective components or parts, using hand tools and precision instruments.
  • Set up and operate specialized or standard test equipment to diagnose, test, or analyze the performance of electronic components, assemblies, or systems.
  • Read blueprints, wiring diagrams, schematic drawings, or engineering instructions for assembling electronics units, applying knowledge of electronic theory and components.
  • Identify and resolve equipment malfunctions, working with manufacturers or field representatives as necessary to procure replacement parts.

EXAMPLE JOB TITLES SRC

Communications Technologist, Electrical Engineering Technician

MEDIAN PAY SRC

$95,740

EDUCATION & TRAINING LEVEL

Bachelor's Degree

WORK EXPERIENCE REQUIRED

5+ years

SKILLS & REQUIREMENTS

Critical Thinking, Reading Comprehension, Complex Problem Solving, Active Listening, Troubleshooting

SIMILAR OCCUPATIONS

Robotics Technicians, Industrial Engineering Technologists and Technicians, Mechanical Engineering Technologists and Technicians

Industrial Engineer

Design, develop, test, and evaluate integrated systems for managing industrial production processes, including human work factors, quality control, inventory control, logistics and material flow, cost analysis, and production coordination.

EXAMPLE SCENARIO

An Industrial Engineer is examining the turbine manufacturing process to devise a plan to reduce thea amount of sheet metal wasted.

TYPICAL TASKS SRC

  • Plan and establish sequence of operations to fabricate and assemble parts or products and to promote efficient utilization.
  • Review production schedules, engineering specifications, orders, and related information to obtain knowledge of manufacturing methods, procedures, and activities.
  • Estimate production costs, cost saving methods, and the effects of product design changes on expenditures for management review, action, and control.
  • Draft and design layout of equipment, materials, and workspace to illustrate maximum efficiency using drafting tools and computer.
  • Coordinate and implement quality control objectives, activities, or procedures to resolve production problems, maximize product reliability, or minimize costs.

EXAMPLE JOB TITLES

Industrial Engineer, Manufacturing Specialist

MEDIAN PAY SRC

$149,390

EDUCATION & TRAINING LEVEL

Bachelor's Degree

WORK EXPERIENCE REQUIRED

5+ years

SKILLS & REQUIREMENTS

Reading Comprehension, Active Listening, Complex Problem Solving, Critical Thinking, Writing, Speaking, Monitoring, Judgment and Decision Making, Active Learning, Coordination

SIMILAR OCCUPATIONS

Electrical Engineers, Materials Engineers, Validation Engineers

Mechanical Engineer

Perform engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems.

EXAMPLE SCENARIO

A Mechanical Engineer is designing a scaled-down prototype for a wind turbine blade to test various scenarios, tension values, and compression values that the blade may experience to better understand its functionality.

TYPICAL TASKS SRC

  • Read and interpret blueprints, technical drawings, schematics, or computer-generated reports.
  • Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements.
  • Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information.
  • Develop, coordinate, or monitor all aspects of production, including selection of manufacturing methods, fabrication, or operation of product designs.
  • Investigate equipment failures or difficulties to diagnose faulty operation and recommend remedial actions.

EXAMPLE JOB TITLES

Application Engineer, Design Maintenance Engineer

MEDIAN PAY SRC

$148,780

EDUCATION & TRAINING LEVEL

Bachelor's Degree

WORK EXPERIENCE REQUIRED

5+ years

SKILLS & REQUIREMENTS

Active Listening, Critical Thinking, Mathematics, Reading Comprehension, Science, Complex Problem Solving, Judgment and Decision Making, Operations Analysis, Active Learning, Systems Evaluation

SIMILAR OCCUPATIONS

Aerospace Engineers, Electrical Engineers, Electronics Engineers

Electrical and Electronics Engineer

Apply electrical and electronic theory and related knowledge, usually under the direction of engineering staff, to design, build, repair, calibrate, and modify electrical components, circuitry, controls, and machinery for subsequent evaluation and use by engineering staff in making engineering design decisions.

EXAMPLE SCENARIO

An Electrical Engineer is designing a turbine so installers know where to mount or connect underwater cable lines.

TYPICAL TASKS SRC

  • Modify, maintain, or repair electronics equipment or systems to ensure proper functioning.
  • Replace defective components or parts, using hand tools and precision instruments.
  • See more occupations related to this task.
  • Set up and operate specialized or standard test equipment to diagnose, test, or analyze the performance of electronic components, assemblies, or systems.
  • Read blueprints, wiring diagrams, schematic drawings, or engineering instructions for assembling electronics units, applying knowledge of electronic theory and components.
  • Identify and resolve equipment malfunctions, working with manufacturers or field representatives as necessary to procure replacement parts.

EXAMPLE JOB TITLES SRC

Communications Technologist, Electrical Engineering Technician, Electrical Technician, Electronics Engineering Technician, Electronics Technician, Engineering Technician (Engineering Tech), Engineering Technologist, System Technologist, Technologist

MEDIAN PAY SRC

$67,830

EDUCATION & TRAINING LEVEL

Bachelor's Degree

WORK EXPERIENCE REQUIRED

3-5 years

SKILLS & REQUIREMENTS

Complex Problem Solving, Mathematics, Reading Comprehension, Active Listening, Judgment and Decision Making, Monitoring

Computer and Information Systems Manager

Plan, direct, or coordinate activities in such fields as electronic data processing, information systems, systems analysis, and computer programming.

EXAMPLE SCENARIO

These managers plan, direct, or coordinate activities in such fields as electronic data processing, information systems, systems analysis, and computer programming.

TYPICAL TASKS SRC

  • Direct daily operations of department, analyzing workflow, establishing priorities, developing standards and setting deadlines.
  • Meet with department heads, managers, supervisors, vendors, and others, to solicit cooperation and resolve problems.
  • Review project plans to plan and coordinate project activity.
  • Assign and review the work of systems analysts, programmers, and other computer-related workers.
  • Provide users with technical support for computer problems.

EXAMPLE JOB TITLES SRC

Application Development Director, Data Processing Manager

MEDIAN PAY SRC

$301,830

EDUCATION & TRAINING LEVEL

Bachelor's Degree

WORK EXPERIENCE REQUIRED

5+ years

SKILLS & REQUIREMENTS

Critical Thinking, Active Listening, Reading Comprehension, Judgment and Decision Making, Monitoring, Speaking, Complex Problem Solving, Coordination, Writing, Management of Personnel Resources

SIMILAR OCCUPATIONS

Logistics Engineers, Computer Systems Analysts, Computer Network Architects